The Kruss Flame Photometer instrument is used to determine the concentration of alkaline and alkaline earth elements in aqueous solutions and is a a simple and exceptionally cost-effective alternative to trace analytical techniques such as ICP or AAS.

Fast, powerful analytics technology:

Breakthrough technology, fast, powerful, highly accurate and with comprehensive A.KRÜSS analysis software. Atomic emission spectroscopy for sample concentration determination 2X faster than conventional instruments and 24/7 measurement operation – delivers accurate readings to 8 digits in 30 seconds and meets all requirements. all important international standards.

Detection limits, pattern processing, and overhead:

Can measure Na, K, Ca and Li simultaneously with a detection limit of 0.01mg/l.

Kruss instruments provide sample throughput of up to 120 measurements per hour and have the option of a fully automatic 24 H measurement operation.

At a cost of only 300VND per measurement, the FP-8000 series is the most economical measurement method for alkaline and alkaline earth metals for Analytical Centers sample analysis service

Full automatic measurement and sample preparation

With Kruss Flame Photometer, measurement can be made with sample volume only 1ml, Analyte is taken from autosampler by main dosing unit high and transfer to one of the 2 mixing chambers. There, the substance is automatically diluted to the required concentration by automatic solvent addition.

Highly accurate measurements thanks to the ideal ratio of sample and carrier mixture mixer:

With the help of the Venturi effect, the analyte is drawn into the atomizer as an aqueous solution and atomized (vaporised) extremely finely. Excessively large droplets are captured in the spray chamber and discharged through the dropper sensor.

Waste monitoring serves as a control parameter by which sample flow and atomization can be optimally adjusted.

Kruss flame photometer gives objective results because the shape and color of the flame can be observed through the glass chamber.

High sensitivity optical sensor for highly accurate concentration determination

The elements to be measured, such as sodium, potassium, calcium and lithium, emit light of a characteristic wavelength due to thermal excitation. Different wavelengths are detected by a high-precision optical sensor.

Can measure 5 different elements simultaneously. In addition, different concentration ranges of the same element can be detected.

Safety through effective cooling and monitoring

For added user safety, the integrated cooling airflow reduces hot exhaust emissions below 50 °C. Additionally, flame monitoring software help detect abnormal situations, the safety valves will automatically close and lock the gas source immediately.

The Kruss flame photometers series are divided into several types, depending on your application and needs:

• Kruss Flame Photometer for Lab use
• Kruss flame photometer for use in production
• Kruss flame photometer with autosampler
• Kruss flame photometer with automatic sample injection and dilution