Medical Autoclave ALP Model CLM-40L
Manufacturer: ALP
Origin: Japan
Contact Us
Mô tả
Thông số kĩ thuật
Phụ kiện
Tài liệu đính kèm
Medical Sterilization Appraisal ALP model CLM-40L is the 3rd model, the highest in the CLM Series . This is an sterilized cooling line that is commonly used in hospitals, medical facilities, etc. Attractively equipped with many reliable security features for the duplication process and safety for users.
Some featured lines steam duplicate y ALP model CLM-40L :
- Temperature: 40 – 135°C
- Steaming volume: 117 Liters
- Maximum pressure: 0.240MPa
- Accessories: 2 sample baskets φ380 × 400mm
Feature of Model CLM-40L:
Only need a power source to use
With Model CLM-40L, you don’t need pipelines and drainage works. You can install it almost anywhere.
Can accommodate large tools
Model CLM-40L of CLM Series can accommodate an appliance with a vertical 800mm, while you can still install the autoclave in a rather narrow space thanks to the small area of only one square meter.
Can sterilize liquids needed during clinical examination
Standard “Sterilize / Warm” and “Dissolve / Warm” models of Model CLM-40L are optimized for decontamination liquid sterilization. The optional floating sensor allows you to set sterilization conditions even for large volumes of liquid.
![app alp clm series](https://hpi.com.vn/wp-content/uploads/2022/07/alp-clm-series-2.jpg)
![medical autoclave app alp clm series](https://hpi.com.vn/wp-content/uploads/2022/07/alp-clm-series-3.jpg)
Maximum temperature 135°C
Sterilize instruments at 135°C for 3 to 4 minutes, typically required by EN13060 Class N sterilization conditions for medical sterilization.
Model | CLM-40L |
Autoclave volume | 117 Liters |
Used volume | 105 Liters |
Steam chamber size | Ø400×820 mm |
Outside size | 620x720x1160 mm |
Weight | 95 kg |
Sterilizing temperature | 100 – 135°C |
Dissolution temperature | 40—99°C |
Warm up temperature | 40—60°C |
Time setting | 0 minutes – 48 hours 00 minutes |
Maximum pressure | 0.240MPa |
Safety Features | Interlock lock, Electromechanical lock, Double check system for pot lid, Overpressure detection, Overheat detection, Water shortage prevention, Scene Probe failure alarm, Time difference warning, Data storage in case of power failure, Safety valve, Power off in case of leakage, over voltage or short circuit |
Power supply required | AC220/230/240V, single phase, 50/60Hz |
Standard accessory | 2 grid pattern baskets Ø380x400mm |
Supplied accessories | |
Stainless steel mesh basket | ![]() |
Waste container | ![]() |
Optional accessories (optional) | |
Sterile temperature probe | ![]() |
Printer (directly mounted on Autoclave) | ![]() |
Cooling fan | ![]() |
Recorder | ![]() |
Other sterilization baskets | ![]() ![]() ![]() ![]() |
Catalog Autoclave ALP - CL series
![](https://hpi.com.vn/wp-content/uploads/2022/07/form-yeu-cau-nhan-thong-tin.png)
Leave your questions, we will answer them right away